Description
TechT is constantly innovating and developing new upgrades for marker owners of all kinds, but they especially have a soft spot for Tippmann markers and the Crossover is no exception. The TechT MRT(MASS REDUCTION TECHNOLOGY) HE Pro Series Crossover Bolt has been engineered to maximize efficiency, and consistency. TechT has also pushed down the weight of the bolt considerably making the Tippmann Crossover shoot with much less kick. BUTTERY SMOOTH…. TechT has again used the soft-touch face which will significantly decrease ball breakage. They minimized the weight of the Crossover by using hardened aluminum instead of steel. The hardened aluminum outer body provides a harder, smoother surface for the spring to ride on, this decreases spring wear on the bolt. The MRT HE Bolt also features a newly redesigned stem which delivers even better efficiency and consistency than it's predecessor. As with all of TechT products it carries a Full Lifetime Warranty. The TechT MRT HE Pro Series Crossover Bolt utilizes the stock spring. We saw increases of 25-30 FPS gain when changing out the stock bolt for the MRT HE Bolt. Our increase in efficiency is due to the combination of the soft-touch/high flow face which helps seal off the barrel when fired, the tremendous change in weight, and our new bolt stem design. The sound signature is also greatly reduced when adding the MRT Bolt. The new MRT H.E. design utilizes two o-ring glands that act as sails on the interior of the bolt. These o-rings do not actually seal (therefore they will not need to be replaced). They do however maximize the the transfer of air propelling the bolt forward and by doing so allow the MRT HE bolt to get even better efficiency than ever before. The exhaust port on the interior of the stem allows the bolt to cycle freely and quickly.
Warranty | Returns:
Please see our standard Website Warranty and Returns Information (Link will open in a new window.)